|
Item may not be exactly as pictured.
|
|
|
|
|
|
|
14,000 Lb. Drive-On Lift, Closed Front, 215 Inch Maximum Wheelbase
|
|
Rotunda Part Number:
|
138-SM14EL2
|
|
|
Supplier Part Number:
|
SM14EL2
|
|
|
|
|
|
|
|
Product Supplied By Rotary Lifts
|
|
|
| Color: | | |
| Phase: | | |
| Voltage: | | |
|
|
|
|
DetailsROI Calculator
|
|
|
|
|
Our four-post surface lifts accommodate a wide range of vehicles. Routine vehicle servicing and maintenance with a Rotary standard 4-post lift is just the ticket.
Move beyond the basics and the flexibility becomes apparent as you pick from a list of optional equipment. Lube work is made easy when a rolling drain pan with splash guard, drain valve and dust cap is added. Bolt-on alignment kits include a turning radius gauge kit (front), slip plate kit (rear only on SM18 series) and all necessary hardware.
FEATURES
- 14,000 lb., 18,000 lb. and 30,000 lb. capacities available
- 14,000 lb. capacity lifts are available in open front or rear design allowing for greater access to under vehicle components and rolling jack usage
- Patented Sentinel Lock system (US Patent No. 6,446,757) slack cable guide arm that stays "on guard" to manage the lock latch
- 14,000 lb. and 18,000 lb. capacity lifts come with an air filter/regulator/lubricator to extend the life of your lift and air powered tools
- Adjustable latch bars ensure the runways are level when resting on the locks at any of the locking positions
- Available in multiple runway lengths for various wheelbases
- Non-skid surface allows sure grip of tires and a "sure foot" for technicians standing on the lift
- Non-welded runway for strength, durability and to provide a smooth track for rolling jacks
- Cylinder located under the runway to eliminate any opportunity for vehicle door or mirror damage
- Third party ALI Certified, tested by ETL to meet or exceed strict ANSI standards and go through rigorous safety tests such as a 1.5 times rated capacity load test, lock test by cutting the cables and deformation tests
SPECIFICATIONS
Closed or open front
Closed
Maximum wheelbase*
215"
Rise
73-3/4" (1873 mm)
Length overall"
22' 9" (6934 mm)
Width overall**"
11' 1" (3378 mm)
Inside of columns**
117-1/2" (2985 mm)
Between front and rear columns
219-7/8" (5585 mm)
Height of columns
6' 10-1/8" (2086 mm)
Width of runways
20" (508 mm)
Height of runways
7" (178 mm)
Width between runways (minimum)
43" (1092 mm)
Width between runways (maximum)
N/A
Lifting capacity
14,000 lb. (6350 kg)
Motor
2 hp
Voltage single phase
208/230 volt
Time of full rise
55 seconds
Minimum bay size
15' x 27' (4572 x 8230 mm)
* Maximum wheelbase is based on a tire diameter of 29-1/2" (749 mm).
" Length overall is 8" shorter and width overall is 8" wider with power unit mounted on the side of the column (14,000 lb. capacity lifts).
** Overall widths reflect standard settings. Alternate settings may be available.
|
Return on Investment (ROI) Calculator
Use the following formula to figure your Return on Investment (ROI)
|
|