WARNING:

Cancer & Reproductive Harm. www.P65Warnings.ca.gov

Move beyond the basics and the flexibility becomes apparent as you pick from a list of optional equipment. Lube work is made easy when a rolling drain pan with splash guard, drain valve and dust cap is added. Bolt-on alignment kits include a turning radius gauge kit (front), slip plate kit (rear only on SM18 series) and all necessary hardware.

• 14,000 lb., 18,000 lb. and 30,000 lb. capacities available


• 14,000 lb. capacity lifts are available in open front or rear design allowing for greater access to under vehicle components and rolling jack usage


• Patented Sentinel Lock™ system (US Patent No. 6,446,757) slack cable guide arm that stays "on guard" to manage the lock latch


• 14,000 and 18,000 lb. capacity lifts come with an air filter/regulator/lubricator to extend the life of your lift and air powered tools


• Adjustable latch bars ensure the runways are level when resting on the locks at any of the locking positions


• Available in multiple runway lengths for various wheelbases


• Non-skid surface allows sure grip of tires and a "sure foot" for technicians standing on the lift


• Non-welded runway for strength, durability and to provide a smooth track for rolling jacks


• Cylinder located under the runway to eliminate any opportunity for vehicle door or mirror damage


• Third party ALI Certified, tested by ETL to meet or exceed strict ANSI standards and go through rigorous safety tests such as a 1.5 times rated capacity load test, lock test by cutting the cables and deformation tests

SPECIFICATIONS

Closed or open front
Closed

Maximum wheelbase*
182-1/2" (4636 mm)

Rise
73-3/4" (1873 mm)

Length overall"
20' 9" (6325 mm)

Width overall**"
11' 1" (3378 mm)

Inside of columns**
117-1/2" (2985 mm)

Between front and rear columns
195-7/8" (4975 mm)

Height of columns
6' 10-1/8" (2086 mm)

Width of runways
20" (508 mm)

Height of runways
7" (178 mm)

Width between runways (minimum)
43" (1092 mm)

Width between runways (maximum)
N/A

Lifting capacity
14,000 lbs. (6350 kg)

Motor
2 hp

Voltage single phase
208/230 volt

Time of full rise
55 seconds

Minimum bay size
15' x 25' (4572 x 7620 mm)

* Maximum wheelbase is based on a tire diameter of 29-1/2" (749 mm).
" Length overall is 8" shorter and width overall is 8" wider with power unit mounted on the side of the column (14,000 lb. capacity lifts).
** Overall widths reflect standard settings. Alternate settings may be available.