|
Item may not be exactly as pictured.
|
|
| Related Products & Accessories |
 | |
|
|
|
|
10,000 Lb. Versymmetric� Lift With Offset 3-Stage Front Arms and 3-Stage Rear Arms with 3' Column Extension
|
|
Rotunda Part Number:
|
223-CL10V3-3
|
|
|
Supplier Part Number:
|
CL10V3-3
|
|
|
|
|
|
|
|
Product Supplied By Challenger Lifts Inc.
|
|
|
| Color: | | |
| Phase: | | |
| Voltage: | | |
|
|
|
Original Price: USD $7,265.41
Sale Price: USD $7,048.00
Your Total Savings: USD $217.41 (3%) |
|
|
|
DetailsLiteratureROI Calculator
|
|
|
|
|
Service more vehicles and make more money with the CL10 series two post auto lifts. Its exclusive Versymmetric® Technology provides the versatility to safely lift vehicles symmetrically or asymmetrically within the same service bay. With standard directSPOT™ arm design and three Versymmetric® productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post automotive lifts are the best choice for professional service facilities. Other standard features include double telescoping screw pads, Heavy-Duty pulley and cable equalization system, elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release and padded overhead shut off system.
SPECIFICATIONS
Lift Capacity* |
10,000 lb. |
Rise Height** |
75 1/8" |
Column Height |
14' 8" |
Cylinder Overall (Full Stroke) |
11' 11" |
Adjustable Width Overall |
11' 6 1/2 / 11' 11" |
Drive Thru Clearance*** |
100 1/2" / 105" |
Floor to Overhead Switch*** |
14' 2 1/2" |
Front Arm Reach (Min/Max) |
Min. 19 13/16" / Max. 42" |
Rear Arm Reach (Min/Max) |
Min. 37 5/8" / Max. 60" |
Screw Pad Height**** |
Min. 3 7/8" / Max. 6 1/2" |
Inside Columns*** |
110" - 114 1/2" |
Low Lock Height |
12" |
Motor |
2 HP |
Voltage |
208v - 230v (Single Phase Standard) |
Speed of Rise |
48 Seconds |
Maximum Load Per Arm |
2,500 lb. |
Ceiling Height Required |
14' 9" |
Shipping Weight |
2,025 lb. |
* Lift capacity ratings are based on loads equally distributed on all four arms.
** Rise Height is measured with adjustable screw pads in highest position.
*** Specifications are listed with lift at maximum width and/or height settings.
**** Specifications are listed w/o rubber pad, for measurements with rubber pad add 1/4" (6mm).
FEATURES
- Adjustable arm restraint shafts compensate for uneven floors
- Grease fittings located on arm pin bushings minimize corrosion to keep arms swinging freely
- Double telescoping screw pads adjust from 3-7/8" to 7-1/8" reducing the need for adapters
- Rubber door guards protect vehicles from door damage when accessing driver controls
- 48" elongated carriage design decreases load on bearing
- Heavy-Duty 5" diameter pulley and 5/16" cable reduces stress on equalization system and increases cable life
- Fully gusseted base plate design reduces column deflection
- 11' 8" standard height allows lift to be placed in standard service bay with 12' ceiling
- Available 2' and 3' column extensions enable technician to work at an ergonomic height when servicing taller vehicles
- Padded overhead shut off system prevents vehicle damage from being raised too high
- Single-point mechanical lock release system allows technician to disengage both column locks simultaneously
- Many accessories available
- Optional 3 phase electrical also available. Specify at time of order
- Standard lift colors are Red and Blue. Optional colors available
|
Return on Investment (ROI) Calculator
Use the following formula to figure your Return on Investment (ROI)
|
|