WARNING:

This product contains chemicals known to the state of California to cause cancer, and birth defects or other reproductive harm. www.P65Warnings.ca.gov

The Pro Spot Weld Drill is used to drill out spot welds so that the panels can be separated while leaving one side intact. The weld drill comes with carbide drill bits that can be safely used on today's high-strength steels -- including boron.

Pro Spot's Spot Weld Drill has two very unique features that separate them from the rest on the market: Two-Stage Start & Two-Flute Bits.

• The Two-Stage Start is the core feature of this spot weld drill. As the trigger handle is pushed on the drill, the bit moves forward to come in contact with the location to be drilled (Stage 1). Once the bit comes in contact with the metal, the bit starts spinning (Stage 2). All this is done with the simple squeeze of the handle, making it extremely easy to line up because the bit is against the metal before the drilling starts. The Two-Stage Start prolongs the life of the bits by eliminating the inward collision of the bit against the metal while it is spinning.


• Two-Flute Bits- this two blade geometry (rather than three), has more material around the blades which makes them much more resistant to impact and vibration. This feature increases the lifetime of the bit!

The Spot Weld Drill is made to drill out spot welds on Mild Steel, High Strength Steel (HSS), and Boron Steel (UHSS).